Depth options are based on your configuration for fiberglass polyester resin molded fiberglass grating.
Fiberglass material options are based on your configuration for 1-1/2" deep fiberglass molded fiberglass grating.
1-1/2" Deep Molded Fiberglass Grating 1-1/2" Square Mesh Design - Polyester Resin
1-1/2" deep Molded Fiberglass Grating has a square mesh design with 1-1/2" square mesh configuration. Isophthalic polyester resin is an industrial grade resin with a flame spread rating of Class 1/25 or less (flame spread rating ASTM E-84 Tunnel Test). Molded grating is designed with more resin than fiberglass ratio (70% resin to 30% fiberglass). This makes molded fiberglass grating more corrosion resistant due to increased resins. The lower fiberglass ratio also means that this material will not span as far, compared to pultruded gratings. Molded fiberglass gratings have a bi-lateral design, therefore making it easier in determining where supports are required. Available in meniscus (non-gritted) and applied grit surfaces. Colors available are dark gray, green, and safety yellow. Available panel sizes include 4' x 12', 4' x 8', and 3' x 10'.
Popular Product Applications
Here are several applications that are popular among this product.
- Water Screens
- Transformer Pit Grating
- Splash Walls
- Pool Decks
- Marine Docks
- Drain Grates
- Architectural Paneling