The inherent strength of bar grating is partially dependent on the spacing between each bar. Our narrowest spacing, 7W4, is ADA approved. Spacing options are based on your configuration for 1-1/2" deep stainless steel smooth light-duty bar grating.
The inherent strength of bar grating is partially dependent on the depth or height of each bar. A deeper product will generally provide more strength. Depth options are based on your configuration for 11w2 stainless steel smooth light-duty bar grating.
Carbon steel is our most economical choice, while stainless is our most durable. Material options are based on your configuration for 11w2 1-1/2" deep smooth light-duty bar grating.
Our standard surface option is smooth. Where slip-resistance is important, serrated and SlipNOT surfaces provide additional traction. Surface options are based on your configuration for 11w2 1-1/2" stainless steel light-duty bar grating.
11-W-2 Stainless Steel Light-Duty Bar Grating 150-11 Serrated (1-1/2" Depth)
11-W-2 welded, light-duty stainless steel bar grating is used when A.D.A. specifications are required. It is available in widths up to 3’ and lengths up to 24’. Available in bar thicknesses of 1-1/2" x 3/16" (A.D.A. spaced), which allows the maximum allowed A.D.A. spacing (1/2") between bearing bars and also 1-1/2" x 1/8". This light-duty welded close mesh style carbon steel grating is manufactured by a resistance-weld process. Cross bars are fused to bearing bars to form a permanent joint. Bearing bars are spaced at 11/16” on center and cross bars are 2” on center. Available in smooth, serrated, and non-slip surfaces. Finished available include mill finish as fabricated, with sand blasted finished available upon request. Please contact your P&R Metals sales representative for additional product information.
Popular Product Applications
Here are several applications that are popular among this product.
- Architectural Paneling
- Bridge Decks
- Drain Grates
- Trench Covers
- Transformer Pit Grating