Picture shown is representative of size but may not be the actual material content.

19-W-4 Carbon Steel Light-Duty Bar Grating 75 Smooth (3/4" Depth)

Home

Grating

Bar Grating

Welded Bar Grating

Light-Duty Bar Grating

19-W-4 Carbon Steel Light-Duty Bar Grating 75 Smooth (3/4" Depth)

Spacing

The inherent strength of bar grating is partially dependent on the spacing between each bar. Our narrowest spacing, 7W4, is ADA approved. Spacing options are based on your configuration for 3/4" deep Carbon Steel Smooth Light-Duty Bar Grating.

19W4

19W2

15W4

15W2

Depth

The inherent strength of bar grating is partially dependent on the depth or height of each bar. A deeper product will generally provide more strength. Depth options are based on your configuration for 19W4 Carbon Steel Smooth Light-Duty Bar Grating.

3/4"

Material

Carbon steel is our most economical choice, while stainless is our most durable. Material options are based on your configuration for 19W4 3/4" deep Smooth Light-Duty Bar Grating.

Carbon Steel

Surface

Our standard surface option is smooth. Where slip-resistance is important, serrated and SlipNOT surfaces provide additional traction. Surface options are based on your configuration for 19W4 3/4" Carbon Steel Light-Duty Bar Grating.

Smooth

Quote Options

19-W-4 Carbon Steel Light-Duty Bar Grating 75 Smooth (3/4" Depth)

19W4 welded, light-duty carbon steel bar grating is available in widths up to 3’ and lengths up to 24’. Available in 3/4" x 3/16" bar thicknesses. The light-duty carbon steel grating is manufactured by a resistance-weld process. Cross bars are fused to bearing bars to form a permanent joint. Bearing bars are spaced at 1-3/16” on center and cross bars are 4” on center. Available only in smooth due to bar depth. Should serrated be required, please go to 1" depth. Available in mill, black primer, and hot dipped galvanized finish.